EXTERNAL CASE USER'S MANUAL

Mode: CD-R3-FW

A. Hardware Installation Guide

1. Items to be installed:

A. Body case
B. front cover
C. back cover
D. plastic panel
E. short screws x 4
F . long screws x 4

2. Insert the device (CD-ROM / DVD/ CD-RW.. ) into the body case

3.Connect the IDE and power cables attached on the back cover to the device

4. Insert the back cover into the case

5.Screw the back cover firmly to the case (short screws - E)

6. Push the front side of the divice a little in and fix it by hand for screwing ( long screws - F)

7. Panel installation (This step is only for installing Hard Drive)

(1) Insert the plastic panel into the front cover from inside;each tenon of the
panel has to be placed on the correspondent track of the front cover.

(2)Push the panel in until it's firmly jointed

8. Bracket installation (This step is only for installing Hard Drive)

(1) Bracket and screws

(2) Screw both the brackets to the hard drive

(3) Insert the hard drive into the body case

(4) Insert the hard drive until position A match position B

(5) Fix hard drive on the case by screws

9. Insert the front cover into the case

10.Screw the front cover firmly to the case ( short screws - E)

11.Connect the Firewire and power cables to the correct ports back on the cover

12.Complete

B. Driver Installation Guide

for PC : Auto detection, no driver installation is needed.

for MAC :

OS 8.6 :Please insert the driver CD and follow the directory :
CD ROM \ CD-RX-FW \ ; double click the driver according to the device you have (for HD,
CDROM,MO). (please see the readme.htm for reference)

OS 9.X and above: No driver installation is needed.