EXTERNAL ENCLOSURE USER'S MANUAL

Model: HD-D3-U2

A. Hardware Installation Guide

1. Items to be installed:

A. back cover
B. front cover
C. body case
D. insulation paper
E. metallic stick

2. Stick the insulation paper to the bottom side of the HD

3. Insert the HD into the body case

4. Insert the back cover into the body case until the tenon is firmly placed

5. Insert the front cover as step 4

6. Connect USB cable to the mini USB port on the external case

7. Connect both USB plugs to the computer to obtain enough power

8.Or use power adaptor as a power source(optional)

9. Use the metallic stick to uninstall the covers. Please poke in the tenon behind
the socket slightly with the stick and pull out the cover (too much pressure will
break the tenon of the cover ).

B. Driver Installation Guide

• No Driver required in Windows ME / Windows 2000 / Windows XP operating system.

• For Windows98

(Make sure the external device is disconnected before the installation)

1. Please insert the CD into CD-ROM.

2. Please connect HD-D3-U2 2.5" external enclosure to the computer and Windows 98 will detect it
automatically.

3. The pop-up window "Add New Hardware Wizard" will come out. Please follow the instruction to continue.

(1) Click on the "Next" button

(2) Check "Search for the best driver for your dvice.(Recommanded)"
and click on the "Next" button.

(3) Please specify a location

(4)The window will show the neme of the USB device, and then you can click on the "Next"

button to install the driver.

(5)After installing the driver, you can click "finish" button to complete the driver installation.

Restart your computer.

C. Driver Installation Guide (FOR MAC)

Support only Mac OS 9.X and above version (PnP), no driver installation is needed.