EXTERNAL ENCLOSURE USER'S MANUAL

Model: HD-D4-U2

A. Hardware Installation Guide

1. Items to be installed:

A. body case
B. hard drive
C. back cover with pc board
D. screws

2. Install the hard drive to the IDE slot on the pc board (printed side of the hard drive faces up; please refer to the picture shown below)

3. Insert the HD along with pc board into the body case

4. Screw the back cover firmly to the body case

5. Connect USB cable to the USB port

6. Please connect both USB plugs to USB ports of the computer

B. Driver Installation Guide

• No Driver required in Windows ME / Windows 2000 / Windows XP operating system.

• For Windows98SE

(Make sure the external device is disconnected before the installation)

1. Please insert the CD into CD-ROM.

2. Please connect HD-D4-U2 2.5" external enclosure to the computer and
Windows 98 will detect it automatically.

3. The pop-up window "Add New Hardware Wizard" will come out. Please
follow the instruction to continue.

(1) Click on the "Next" button

(2) Check "Search for the best driver for your dvice.(Recommanded)" and click on the "Next" button.

(3) Please specify a location

(4)The window will show the name of the USB device, and then you can click on the "Next" button to install the driver.

(5)After installing the driver, you can click "finish" button to complete the driver installation.

Restart your computer.

C. Driver Installation Guide (FOR MAC)

Support only Mac OS 9.X and above version (PnP), no driver installation is needed.