Model: CD-R3-U2

A. Hardware Installation Guide

1. Items to be installed:

A. body case
B. front cover
C. back cover
D. plastic panel
E. short screws x 4
F. long screws x 4

2. Insert the device (CD-ROM / DVD/ CD-RW...) into the body case

3.Connect the IDE and power cables attached on the back cover to the device

4. Insert the back cover into the case

5.Screw the back cover firmly to the case (short screws - E)

6.Push the front side of the device a little in and fix it by hand for screwing ( long screws - F)

7. (This step is only for installing Hard Drive)

(1) Insert the plastic panel into the front cover from inside;each tenon of the panel has to be
placed on the correspondent track of the front cover.

(2)Push the panel in until it's firmly jointed

8. Bracket installation (This step is only for installing Hard Drive)

(1) Bracket and screws

(2) Screw both the brackets to the hard drive

(3) Insert the hard drive into the body case

(4) Insert the hard drive until position A match position B

(5) Fix hard drive on the case by screws

9. Insert the front cover into the case

10. Screw the front cover firmly to the case (short screws - E)

11.Connect the USB and power cables to the correct ports back on the cover

12. Complete

B. Driver Installation Guide (FOR PC)

• No Drivers needed to be installed under Windows ME / Windows 2000 / Windows XP operating system.

• For Windows98

(Make sure the external device is disconnected before the installation)

1. Please insert the driver CD into CD-ROM

2-1 Windows will automatically run the installation wizard, select "5.25"External Enclosure / Manual",
then "CD-R3-U2 (Driver for Win98)" on the menu

2-2 The driver will be installed automatically

Or you can double click the installation file "WIN98.EXE" in the following directory:

CD-ROM\ External \ RX-U2-A \ WIN98.EXE

Please follow the instruction as following:

1-1

1-2

1-3

1-4

After restarting your computer, please connect the CD-R3-U2 external case to your computer by the

attached USB cable. In few seconds the new external CD-ROM drive will display in "my computer"

window.

C. Driver Installation Guide (FOR MAC)