EXTERNAL ENCLOSURE USER'S MANUAL

Model: HD-D1-U2

A. Hardware Installation Guide

1. Items to be installed:

A. body case

B. top cover

C. bottom cover

D. screws for fixing HD x 4

E. screws for fixing covers x 8

2. Insert the HD into the body case

3. Screw the Hard Drive firmly to the case ( screws D)

4. cover with the top / bottom

5. Screw top / bottom cover firmly to the body case ( screws E)

6.Connecy USB cable to the mini USB port on the external case

7. Connect both USB plugs to the computer to obtain enough power

8. Or use the power adaptor as a power source (optional)

B. Driver Installation Guide

• No Driver required in Windows ME / Windows 2000 / Windows XP operating system.

• For Windows98

(Make sure the external device is disconnected before the installation)

1. Please insert the CD into CD-ROM.

2. Please connect the HD-D1-U2 2.5" external enclosure to the computer and Windows 98

will be detecting it automatically.

3. The pop-up window "Add New Hardware Wizard" will come out. Please follow the instruction to

continue.

(1) Click on the "Next" button

(2) Check "Search for the best driver for your dvice.(Recommanded)"
and click on the "Next" button.

(3) Please specify a location

(4) The window will show the name of the USB device, and then you can click on the "Next" button to install the driver.

(5) After installing the driver, you can click "finish" button to complete the driver installation.

Restart your computer.

C. Driver Installation Guide (FOR MAC)