EXTERNAL ENCLOSURE USER'S MANUAL

Model: HD-D1-U2

A. Hardware Installation Guide

1. Items to be installed:

A. body case

B. top cover

C. bottom cover

D. screws for fixing HD x 4

E. screws for fixing covers x 8

2. Insert the HD into the body case

3. Screw the Hard Drive firmly to the case ( screws D)

4. cover with the top / bottom

5. Screw top / bottom cover firmly to the body case ( screws E)

6.Connecy USB cable to the mini USB port on the external case

7. Connect both USB plugs to the computer to obtain enough power

8. Use a DC 5V 2A power adaptor as a power source if the USB could not
provide enough power.

B. Driver Installation Guide

• No Driver required in Windows ME / Windows 2000 / Windows XP operating system.

• For Windows98

(Make sure the external device is disconnected before the installation)

1. Please insert the CD into CD-ROM.

2. An auto run menue will show up, please select "2.5"External Enclosure / Manual", then click
"HD-D1-U2,HD-D3-U2,HD-D4-U2(Driver for Win98)", the driver will be installed automatically.

The steps are shown as below :

2-1

Select the language

2-2

Click "Next"

2-3

Select folder where Setup will install files (C:\Program Files\USBToolbox) then click "Next"





2-4

Select program folder (USB Storage Toolbox) then click "Next"

2-5

Installing driver




2-6

Restart computer

3. After restarting the system, connect the enclosure to the computer,
the system will be finding new hardware and install it.

4. Installation is complete.

C. Driver Installation Guide (FOR MAC)