EXTERNAL CASE USER'S MANUAL

Model: CD-R4-FW (IEEE1394)

A. Hardware Installation Guide

1. Items to be installed:

A. body case
B. CD ROM drive
C. back cover with IDE / power cables
D. stand
E. bracket for CD ROM drive x 2
F. long screws x 4
G. short screws x 8

2. Prepare to fix the bracket to the side of CD ROM drive; please move the
bracket to the proper position as shown in the picture below:

3. Screw both brackets firmly to the CD ROM drive with short screws G

4. Connect the IDE and power cables attached on the back cover to the
CD ROM drive

5. Insert the tenons of the back cover into the sockets on the brackets

6. Slide in the CD ROM drive with the brackets along with the tracks on body
case

After inserting the CD ROM drive

7. Screw the back cover to the body case with screws F

8. (Optional) Prepare to install the stand; please notice that the side with fillister on the stand will slide in the body case first

Slide in the stand until the fillister fits the tenon on the body case

9. Connect FireWire and power cables to the correct ports back on the cover

10. Complete

B. Driver Installation Guide

for PC : Auto detection, no driver installation is needed.

for MAC :

OS 8.6 : Please insert the driver CD and follow the directory :
CD ROM \ CD-RX-FW \ ; double click the driver according to the device you have (for HD, CDROM,MO). (please see the readme.htm for reference)

OS 9.X and above:No driver installation is needed.