EXTERNAL CASE USER'S MANUAL

Model: HD-D5-FW (IEEE1394)

A. Hardware Installation Guide

1. Items to be installed:

A. Case body

B. Hard Drive

C. Bracket for hard drive

D. stand

E. back cover with IDE / power cables

F. short screws

G. long screws

2. Connect the IDE and power cables attached on the back cover to the
Hard Drive

3.Screw the hard drive firmly to the bracket ( screws F)

Please align the bracket and the front side of hard drive before screwing
as the picture shown below

4.Screw the pc board along with back cover to the bracket

5.Slide in the whole hard drive along with bracket (the printed side of
body case faces up)

6. Screw the back cover firmly to the body case (screws G)

 7. (Optional) Prepare to install the stand; please notice that the side with fillister on the stand will slide in the body case first

Slide in the stand until the fillister fits the tenon on the body case

8. Connect IEEE1394 and power cables to the correct ports back on the cover

9. Complete

B. Driver Installation Guide

for PC : Auto detection, no driver installation is needed.

for MAC :

OS 8.6 : Please insert the driver CD and follow the directory :
CD ROM \ HD-DX-FW \ ; double click the driver according to the device you have (for HD, CDROM,MO).
(please see the readme.htm for reference)

OS 9.X and above: No driver installation is needed.