EXTERNAL CASE USER'S MANUAL

Model: HD-D5-U2 (USB)

A. Hardware Installation Guide

1. Items to be installed:

A. Case body

B. Hard Drive

C. Bracket for hard drive

D. stand

E. back cover with IDE / power cables

F. short screws

G. long screws

2. Connect the IDE and power cables attached on the back cover to the
Hard Drive

3. Screw the hard drive firmly to the bracket ( screws F)

Please align the bracket and the front side of hard drive before screwing
as the picture shown below

4. Screw the pc board along with back cover to the bracket

5. Slide in the whole hard drive along with bracket (the printed side of
body case faces up)

6. Screw the back cover firmly to the body case (screws G)

 7. (Optional) Prepare to install the stand; please notice that the side with fillister on the stand will slide in the body case first

Slide in the stand until the fillister fits the tenon on the body case

8.Connect USB and power cables to the correct ports back on the cover

9. Complete

B. Driver Installation Guide (FOR PC)

• No Drivers needed to be installed under Windows ME / Windows 2000 / Windows XP operating system.

• For Windows98SE

(Make sure the external device is disconnected before the installation)

1. Please insert the driver CD into CD-ROM

2-1 Windows will automatically run the installation wizard, select "3.5"External Enclosure / Manual", then "HD-D5-U2 (Driver for Win98)" on the menu

2-2 The driver will be installed automatically

Or you can double click the installation file "WIN98.EXE" in the following directory: CD-ROM\ External \ DX-U2-A \ WIN98.EXE

Please follow the instruction as following:

1-1

1-2

1-3

1-4

After restarting your computer, please connect the HD-D5-U2 external case to your computer by the

attached USB cable. In few seconds the new external CD-ROM drive will display in "my computer" window.

C. Driver Installation Guide (FOR MAC)

Support only Mac OS 9.X and above version (PnP), no driver installation is needed.